 code: FT-AT100
|
Treehog Contractor Chainsaw Trouser Type A
Product Description The Treehog clothing range is a cost effective range of equipment, ideally suited to contractors and domestic users. This TH100 trouser has chainsaw protection to Class 1 (20m/s) Type A (front protection only). Features
- EN381-5 Type A Class 1 (20m/s)
- 50% Polyester; 50% Cotton
- Dirt and water resistant fabric
- 2 side pockets, 1 rule pocket
- 1 rear hip pocket with velcro flap
|
|
 code: FT-THHV1610
|
Treehog Hi-Vis Orange GO/RT Chainsaw Trouser Type A Class 2
Treehog Hi-Vis Orange GO/RT Chainsaw Trouser Type A Class 2
Bi-Stretch breathable material in crotch.
Treehog THHV1610
|
|
 code: FT-THHV1500
|
Treehog Hi-Vis Orange GO/RT Chainsaw Jacket Class 1
Treehog Hi-Vis Orange GO/RT Chainsaw Jacket Class 1
Class 1 GO/RT Jacket
|
|
 code: FT-5015
|
Arbortec "PYL" High Neck Hoodie Black/Grey 5015
This good looking black & grey hoodie is made from 320 gsm enzyme washed fabric for comfort and warmth, and features a high neck line for extra warmth.
The soft brushed lining inside the hood is colour matched to the drawstring adjusters, and the sleeves are finished with longer than standard, cosy elasticated cuffs.
Two extra features have been added to this garment. Thumb loops in the cuffs have been added for additional comfort when reaching up. Also a mobile phone pocket at the front of the hoodie, will ensure your IT is kept safe and in one place
A large pouch pocket is an ideal place for wallet, keys or cold hands, and with the "Protecting Your Lifestyle" print on the back, this hoodie is good looking enough to wear on site or after work.
Please bear in mind that you may want two or three of these hoodies - as you will probably end up wearing them most of the time! more details ...
|
|
 code: FT-5020
|
Arbortec "PYL" Zip Front Hoodie Black/Grey 5020
This super soft and warm zipper front hoodie is made from 320 gsm enzyme washed fabric for comfort and warmth, and features a large adjustable hood, with lining colour matched to the drawstrings.
The sleeves are finished with longer than standard, cosy elasticated cuffs and the long front YKK zipper is set in piped seams to complete the look.
Two extra features have been added to this garment. Thumb loops in the cuffs have been added for additional comfort when reaching up. Also a mobile phone pocket at the front of the hoodie, will ensure your IT is kept safe and in one place
In its Black and Grey colour scheme, this hoodie is a classic, and will become one of your favourite garments in no time. more details ...
|
|
 code: FT-AT5015
|
Arbortec Climbers Zip Front Hoodie Jacket AT5020
Product Description
This good looking charcoal grey and lime green hoodie is made from 320 gsm enzyme washed fabric for comfort and warmth, and features a high neck line for extra warmth.
The soft brushed lining inside the hood is colour matched to the drawstring adjusters, and the sleeves are finished with longer than standard, cosy elasticated cuffs.
A large pouch pocket is an ideal place for wallet, keys or cold hands, and with the "Protecting Your Lifestyle" print on the back, this hoodie is good looking enough to wear on site or after work.
Please bear in mind that you may want two or three of these hoodies - as you will probably end up wearing them most of the time!
- 65% cotton, 35%Polyester 320gsm
- Enzyme washed soft finish
- Brushed inner lining
- Two front pockets
|
|
 code: FT-AT5020
|
Arbortec Climbers Zip Front Hoodie Jacket AT5020
Product Description
This super soft and warm zipper front hoodie is made from 320 gsm enzyme washed fabric for comfort and warmth, and features a large adjustable hood, with lining colour matched to the drawstrings.
The sleeves are finished with longer than standard, cosy elasticated cuffs and the long front YKK zipper is set in piped seams to complete the look.
In its charcoal grey and lime green, this hoodie is a classic, and will become one of your favourite garments in no time. Features
- 65% cotton, 35%Polyester 320gsm
- Enzyme washed soft finish
- Brushed inner lining
- Two front pockets
|
|
 code: FT-4010-HV OR
|
Arbortec Breatheflex Chainsaw trousers Type A Class 1 (Orange)
Ultimate Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw operator. Incorporating a Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range is the lightest chainsaw stalling system available. The trousers have been designed to incorporate Climasphere breathable fabrics to make for the most comfortable chainsaw trousers on the market, with a six-way stretch to make them more flexible, and even a tag to secure the trousers to your boots to keep dirt out.
- EN381-5 Class 1 (20m/s) Type A
- Ultra-light multi layered chainsaw shield system with Dyneema
- Kevlar reinforced lower legs for increased abrasion protection
- Hi-Vis Refelective decals on legs and pockets for added safetyl
|
|
 code: FT-4010RED
|
Arbortec Breatheflex Chainsaw trousers Type A Class 1 (Red/Yellow)
Ultimate Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw operator. Incorporating a Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range is the lightest chainsaw stalling system available. The trousers have been designed to incorporate Climasphere breathable fabrics to make for the most comfortable chainsaw trousers on the market, with a six-way stretch to make them more flexible, and even a tag to secure the trousers to your boots to keep dirt out.
- EN381-5 Class 1 (20m/s) Type A
- Ultra-light multi layered chainsaw shield system with Dyneema
- Kevlar reinforced lower legs for increased abrasion protection
- Hi-Vis Refelective decals on legs and pockets for added safetyl
|
|
 code: FT-4050RED
|
Arbortec Breatheflex Chainsaw trousers Type C Class 1 (Red/Yellow)
Ultimate Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw operator. Incorporating a Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range is the lightest chainsaw stalling system available. The trousers have been designed to incorporate Climasphere breathable fabrics to make for the most comfortable chainsaw trousers on the market, with a six-way stretch to make them more flexible, and even a tag to secure the trousers to your boots to keep dirt out.
- EN381-5 Class 1 (20m/s) Type C
- Ultra-light multi layered chainsaw shield system with Dyneema
- Kevlar reinforced lower legs for increased abrasion protection
- Hi-Vis Refelective decals on legs and pockets for added safetyl
|
|
 code: FT-AB3450
|
Arbortec Breatheflex Chainsaw trousers Type A Class 1 (Orange)
Ultimate Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw operator. Incorporating a Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range is the lightest chainsaw stalling system available. The trousers have been designed to incorporate Climasphere breathable fabrics to make for the most comfortable chainsaw trousers on the market, with a six-way stretch to make them more flexible, and even a tag to secure the trousers to your boots to keep dirt out.
- EN381-5 Class 1 (20m/s) Type A
- Ultra-light multi layered chainsaw shield system with Dyneema
- Kevlar reinforced lower legs for increased abrasion protection
- Hi-Vis Refelective decals on legs and pockets for added safetyl
|
|
 code: FT-AB345087
|
Arbortech Breatheflex AT4050 Type C Class 1 Trousers - Orange/Black ((LIMITED SPECIAL OFFER))
When choosing a new pair of chainsaw trousers, most arborists are looking for light weight, and as comfortable and breathable as possible, so we designed the Breatheflex trouser range.
Incorporating a multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range uses the lightest chainsaw stalling system available, to reduce fatigue when climbing.
The trousers outer shells are made from Climasphere breathable fabrics which are also highly abrasion and snag resistant (a must for tree climbers) and the six-way stretch feature makes for the most comfortable arborists chainsaw pants on the market.
The AT4050 is a Type C trouser (saw protection to the front and rear of the legs) and the protection is rated to Class 1 (20 m/s). more details ...
|
|
 code: FT-AB3454
|
Arbortec Breatheflex Chainsaw trousers Type A Class 1
Ultimate Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw operator. Incorporating a Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breatheflex range is the lightest chainsaw stalling system available. The trousers have been designed to incorporate Climasphere breathable fabrics to make for the most comfortable chainsaw trousers on the market, with a six-way stretch to make them more flexible, and even a tag to secure the trousers to your boots to keep dirt out.
- EN381-5 Class 1 (20m/s) Type A
- Ultra-light multi layered chainsaw shield system with Dyneema
- Kevlar reinforced lower legs for increased abrasion protection
- Hi-Vis Refelective decals on legs and pockets for added safety
- Available in Short, Regular and Tall
|
|
 code: FT-AB3454OFFER
|
Arbortec Breatheflex Chainsaw trousers Type A ((BE QUICK LAST FEW AT SILLY SILLY PRICES))
Arbortec Breatheflex Chainsaw trousers Type A Brand new chainsaw protective trousers from Arbortec Breatheflex
- Type A chainsaw protective blocking material (front leg protection only)
- Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw user
- Ultra-light multi layered chainsaw sheild system with Dyneema
- Climasphere Breathable fabrics for comfort
- 6-Way Stretch concept to reduce fatigue
- Kevlar reinforced lower legs for increased abrasion resistance
- Hi-Vis Reflective decals on legs and pockets for added safetyIncorporating the TRIOStrand Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breathflex range is the lightest chainsaw stalling system available
|
|
 code: FT-TH200
|
Treehog Type A Hogaree Bib and Brace
Treehog Type A Hogaree Bib and Brace
Type A Class 1
Features
- Hogaree Type A Class 1
- EN381-5 Type A Class 1 (20m/s)
- Approved by KWF
- 50% Polyester; 50% Cotton
- Bi-Stretch breathable crotch panel
- Elasticated waist band
- 2 side pockets, 1 rule pocket
- Large chest pocket with zipper
- 1 rear hip pocket with velcro flap
- HiVis Orange panels at ankles
|
|
 code: FT-4050OFFER
|
Arbortec Breatheflex AT4050 Chainsaw trousers Type C Class 1 ((LIMITED OFFER))
Arbortec Breatheflex Chainsaw trousers Type C Brand new chainsaw protective trousers from Arbortec Breatheflex
- Type C chainsaw protective blocking material
- Chainsaw protective trousers that bring a new level of comfort and ease of wear for any serious chainsaw user
- Ultra-light multi layered chainsaw sheild system with Dyneema
- Climasphere Breathable fabrics for comfort
- 6-Way Stretch concept to reduce fatigue
- Kevlar reinforced lower legs for increased abrasion resistance
- Hi-Vis Reflective decals on legs and pockets for added safetyIncorporating the TRIOStrand Multi-layered chainsaw shield system with Dyneema for ultimate protection, the Breathflex range is the lightest chainsaw stalling system available
|
|
 code: FT-TH050
|
Arbortec Pro Treehog Contractor Jacket Class 1 Chainsaw Jacket
Contractor Jacket Class 1 Chainsaw Jacket "EN381-11 Class 1 (20m/s) 50% Polyester; 50% Cotton Green with HiVis orange chest and shoulders Stud fastening storm flap Rear ventilation panel 2 breast pocket with velcro 1 inner pocket "
|
|
 code: FT-TH070
|
Treehog Seatless Chainsaw Trouser / Leggings
Treehog clothing range is a cost effective range of equipment, ideally suited to garden machinery dealers, agricultural retail stores and safety equipment distribution companies. The TH100 has Class 1 Type A (front only) chainsaw protection.
|
|
 code: FT-TH110
|
Treehog Contractor PRO Chainsaw Trouser Type C ((SELL OFF SPECIAL OFFER))
Treehog Contractor clothing range is a cost effective range of equipment, ideally suited to garden machinery dealers, agricultural retail stores and safety equipment distribution companies. The TH110 has Class 1 Type c (front and back) chainsaw protection.
- EN381-5 Type C Class 1 (20m/s)
- 50% Polyester; 50% Cotton
- Dirt and water resistant fabric
- 2 side pockets, 1 rule pocket
- 1 rear hip pocket with velcro flap
|
|