SIP Innovation Pro Clothing

Sip Progress Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort. Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee. Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance. Chainsaw protection trousers are defined by EN 381-5. There are three types of leg protection: Types A and B are intended for professional chainsaw wielders during usual wood harvest duty. Here, chainsaw protection is primarily limited to the front side of the legs. Type C is to be employed by persons who usually do not use or are only expected to use chainsaws under exceptional circumstances.

Here the protection covers both front and rear side of the legs.

• Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort.
• Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment
• Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee.
• Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance
• Conforms to EN381-5 Class 1 Type A

Size Chart

• Extra Small (Waist) 66-74 (Leg) 170-182
• Small (Waist) 74-82 (Leg) 170-182
• Medium (Waist) 82-90 (Leg) 170-182
• Large (Waist) 90-98 (Leg)170-182
• Extra Large (Waist) 98-106 (Leg) 170-182
• 2x Extra Large (Waist) 106-117 (Leg) 170-182
• 3x Extra Large (Waist) 117-129 (Leg) 170-182

The NEW Progress TYPE C range of SIP protection chainsaw trousers were developed to satisfy the expectations of the most demanding users.The Progress range comes in 3 colour ways, and is manufactured both with and without chainsaw protection.

• Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort.
• Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment
• Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee.
• Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance
• Conforms to EN381-5 Class 1 Type C

Sip Progress Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort. Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee. Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance. Chainsaw protection trousers are defined by EN 381-5. There are three types of leg protection: Types A and B are intended for professional chainsaw wielders during usual wood harvest duty. Here, chainsaw protection is primarily limited to the front side of the legs. Type C is to be employed by persons who usually do not use or are only expected to use chainsaws under exceptional circumstances.

Here the protection covers both front and rear side of the legs.

• Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort.
• Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment
• Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee.
• Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance

    Conforms to EN381-5 Class 1 Type A

Size Chart

• Extra Small (Waist) 66-74 (Leg) 170-182
• Small (Waist) 74-82 (Leg) 170-182
• Medium (Waist) 82-90 (Leg) 170-182
• Large (Waist) 90-98 (Leg)170-182
• Extra Large (Waist) 98-106 (Leg) 170-182
• 2x Extra Large (Waist) 106-117 (Leg) 170-182
• 3x Extra Large (Waist) 117-129 (Leg) 170-182

The new Progress range of SIP protection chainsaw trousers were developed to satisfy the expectations of the most demanding users.The Progress range comes in 3 colour ways, and is manufactured both with and without chainsaw protection.

• Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort.
• Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment
• Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee.
• Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance
• Conforms to EN381-5 Class 1 Type C

• Bib and brace trousers Type A front protection
• Fabric front: 70% polyester, 30% cotton 235gr/m2
• Fabric back: 65% polyester, 35% cotton 245gr/m2
• Water resistant front fabric due to weaving method and flourocarbon treatment
• Crotch points in bi-stretch fabric
• Elasticated waistband
• Enlarged back bib for comfort
• Adjustable braces
• 2 stitched pockets
• Front Bib pocket with zip
• 1 bellows pocket on left thigh with touch and close fastening
• 1 double pocket for measuring equipment and mobile phone
• Pressure band in pocket for mobile phone

• Foresters jacket with chain saw protection
• Flourocarbon treatment to front fabric for water resistance]
• Hi-viz orange yoke for safe visibility
• Elasticate back for additional comfort
• Back ventilation
• Two breast pockets and one arm pocket
• Two way full length zip
• Extended back tail

• Foresters Jacket with no protection
• Green fabric: 70% polyester, 30% cotton 235gr/m2
• Water resistant front fabric due to weaving method and flourocarbon treatment
• Hi-vis orange insert increases visibility
• Elasticated back
• Back ventilation
• Two chest pockets with bright orange flap
• Two way full length zip
• Green ribbed cuffs
• Extended back tail for comfort

• Type C all round protection
• Fabric front: 70% polyester, 30% cotton 235gr/m2
• Fabric back: 65% polyester, 35% cotton 245gr/m2
• Water resistant front fabric due to weaving method and flourocarbon treatment
• Padding at the bottom with water resistant fabric
• Crotch points in bi-stretch fabric
• Elasticated waistband
• Enlarged back bib for comfort
• Buttons for braces
• 2 stitched pockets
• 1 stitched on back pocket with orange flap with touch and close fastening
• 1 bellows pocket on left thigh with touch and close fastening
• 1 double pocket for measuring equipment and mobile phone
• Pressure band in pocket for mobile phone

• Type C all round protection
• Fabric front: 70% polyester, 30% cotton 235gr/m2
• Fabric back: 65% polyester, 35% cotton 245gr/m2
• Water resistant front fabric due to weaving method and flourocarbon treatment
• Padding at the bottom with water resistant fabric
• Crotch points in bi-stretch fabric
• Elasticated waistband
• Enlarged back bib for comfort
• Buttons for braces
• 2 stitched pockets
• 1 stitched on back pocket with orange flap with touch and close fastening
• 1 bellows pocket on left thigh with touch and close fastening
• 1 double pocket for measuring equipment and mobile phone
• Pressure band in pocket for mobile phone

Sip Progress Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort. Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee. Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance. Chainsaw protection trousers are defined by EN 381-5. There are three types of leg protection: Types A and B are intended for professional chainsaw wielders during usual wood harvest duty. Here, chainsaw protection is primarily limited to the front side of the legs. Type C is to be employed by persons who usually do not use or are only expected to use chainsaws under exceptional circumstances.

Here the protection covers both front and rear side of the legs.

• Texxion 4 way stretch  rip stop outer fabric, 86% Cordura 14% Spandex providing extended wear life with great flexibility and comfort.
• Fabric treated with Teflon HT to make it oil, water and dirt repellent. This ensures a higher degree of protection during the lifetime of the garment
• Pre-shaped convex knees with Armortex fabric (31% Kevlar)to give additional strength to a high wear area as well as improved articulation of the knee.
• Backside reinforced with Armortex fabric (31% Kevlar)for improved wear resistance
• Conforms to EN381-5 Class 1 Type A

Size Chart

• Extra Small (Waist) 66-74 (Leg) 170-182
• Small (Waist) 74-82 (Leg) 170-182
• Medium (Waist) 82-90 (Leg) 170-182
• Large (Waist) 90-98 (Leg)170-182
• Extra Large (Waist) 98-106 (Leg) 170-182
• 2x Extra Large (Waist) 106-117 (Leg) 170-182
• 3x Extra Large (Waist) 117-129 (Leg) 170-182

• Type A front protection
• Fabric front: 70% polyester, 30% cotton 235gr/m2
• Fabric back: 65% polyester, 35% cotton 245gr/m2
• Water resistant front fabric due to weaving method and flourocarbon treatment
• Padding at the bottom with water resistant fabric
• Crotch points in bi-stretch fabric
• Elasticated waistband
• Enlarged back bib for comfort
• Buttons for braces
• 2 stitched pockets
• 1 stitched on back pocket with orange flap with touch and close fastening
• 1 bellows pocket on left thigh with touch and close fastening
• 1 double pocket for measuring equipment and mobile phone
• Pressure band in pocket for mobile phone