code: F1-230TPH200
|
|
TANAKA TPH 230 S Complete Pole Hedgecutter (Abbey Super Special Offer)
|
|
|
|
Features Tanakas revolutionary S start easy starting system (This machine can be started with your finger and thumb first time every time) 22cc, 0.7kW Two-Stroke Engine features two piston rings and a stress relieved, chrome plated cylinder for longer engine life.
D Handle provides comfort and added manoeuvrability.
Articulating / Pivoting Blades allow you to select any cutting angle from -85 to +45 degrees (130 degrees total).
22", Double-Sided, Dual Reciprocating Blades provide excellent cutting speed and powerful cutting action.
Engine Displacement cc (cu. in.) 22 (1.2)
Power 0.7 kW
100% pure Japanese Hedge Hedgecutter
Carburation Walbro double Diaphragm with Primer (easy start and runs at any angle)
Ignition System Transistorized Electronic with lifetime warranty
Fuel Tank Capacity / fl. oz. (cc) 19.3 (570) (runs for about 1 hour on 1 tank)
Clutch System Heavy-Duty Centrifugal with pro linings
Shaft Support 5 Shaft Bearings all the way down the shaft
Drive System 7mm Solid Steel Shaft from engine to hedgecutter end
Shaft Length / 1500 mm (long enough for the tallest of hedges)
Blades / inches (mm) 22 (560), Double Sided
Blades cut up to 30mm
Articulating Angle Degree 130 degrees (-85 to +45)
Dry Weight / lbs. (kg) 13.0 (5.9)
|
|
|
code: C2-AH230
|
|
Shindaiwa AH230S Pole HedgeTrimmer
|
|
|
|
Shape really high hedges just as easily as low ones with Shindaiwa's new AH230 Articulated Hedge Trimmer. Powered by the Shindaiwa 230-series powerhead, proven through years of reliable service, the AH230 Articulated Hedge Trimmer adds another efficient power tool to the Shindaiwa lineup of professional-quality landscaping equipment. The original and best. A light and poweful articulated long-reach hedge trimmer. It's 22" double reciprocating blades make it perfect for trimming tall hedges and low ground cover. - Engine Shindaiwa-built premium 2-cycle engine
- Ignition Fully electronic, 1-piece
- Carburettor Walbro WYJ diaphragm
- Clutch Automatic centrifugal
- Bearing construction Ball-and-caged needle
- Air Cooling Forced-air cooling
- Piston 2 Ring
- Cylinder Chrome-plated
- Blades Double reciprocating, double sided blades
- 10 Position adjustment - range 150 degrees
- Air cleaner Semi wet-type with single thumbscrew access
- Crankshaft 3-piece
- Handle and Throttle Yes
- Dry Weight 5.9 kg. (13 lbs.)
- Displacement 22.5 cc (1.4 cu. in.)
- Ouput 0.8 kW (1.1 hp) @ 7500 rpm
- Fuel Tank Capacity 600 ml. (20.3 fl.oz.)
- Fuel 50:1 Petrol/Oil Mix
- Overall Length 235 cm. (92.5 in.)
- Blade Length 56.7cm
- Warranty 2 Year Consumer, 1 Year Commercial
- Blade strokes per minute 1790 @11,000 rpm
|
|
|
code: E1-325HE3XA
|
|
Husqvarna 325HE3x
|
|
|
A very flexible, professional pole hedge trimmer with an adjustable cutter bar. The engine serves as a counterweight for the cutter bar and makes the machine exceptionally well-balanced and comfortable to use. The reach and adjustable cutting bar make it suitable for both tall and low hedges, with our without a ladder or skylift. Fitted with our E-TECH engine. | |
| Remote control The remote control makes it easy to adjust the cutter bar during operation. | | Adjustable cutter bar Adjustable cutting bar for greater versatility and less tiring work. | | Engine position The engine position also helps divert exhaust fumes away from the user. | | Smart Start The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%. | | Auto return stop switch Stop switch automatically resets to the ON position for trouble-free starting. | | Comfort handles Soft handles for optimum comfort. |
|
|
|
code: E1-325HE4X
|
|
Husqvarna 325HE4x
|
|
|
A very flexible, professional pole hedge trimmer with an adjustable cutter bar and extra long pole. The engine, which serves as a counterweight to the cutter bar, makes the machine exceptionally comfortable and easy to use when cutting taller hedges, without having to use a ladder or skylift. Powered by our E-TECH engine with reduced exhaust emissions. | |
| Tall hedges and ground cover Developed for cutting tall hedges and ground cover. | | Remote control The remote control makes it easy to adjust the cutter bar during operation. | | Adjustable cutter bar Adjustable cutting bar for greater versatility and less tiring work. | | Transport mode Cutter bar in transport mode for easy transport and storage. | | Smart Start The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%. | | Auto return stop switch Stop switch automatically resets to the ON position for trouble-free starting. |
|
|
|
code: F1-2701TPH
|
|
TANAKA TPH 2701S (Abbey Super Special Offer)
|
|
|
|
Features Tanakas revolutionary S start easy starting system (This machine can be started with your finger and thumb first time every time)
27cc, 1.3/5 Hp Two-Stroke Engine features two piston rings and a stress relieved, chrome plated cylinder for longer engine life.
Padded, Anti-Vibration D Handle provides comfort and added manoeuvrability.
Articulating / Pivoting Blades allow you to select any cutting angle from -85 to +45 degrees (130 degrees total).
22", Double-Sided, Dual Reciprocating Blades provide excellent cutting speed and powerful cutting action.
Engine Displacement cc (cu. in.) 27 (1.4)
Power (h.p.) 1.3/5
100% pure Japanese Hedgecutter
Carburetion Walbro Diaphragm with Primer
Ignition System Transistorized Electronic
Fuel Tank Capacity / fl. oz. (cc) 19.3 (570)
Anti-Vibration Front and Rear Handles
Clutch System Heavy-Duty Centrifugal
Shaft Support 5 Shaft Bearings
Drive System 7mm Solid Steel Shaft
Shaft Length / inches (mm) 59 (1500)
Blades / inches (mm) 22 (560), Double Sided
Articulating Angle Degree 130 degrees (-85 to +45)
Dry Weight / lbs. (kg) 13.0 (5.9)
|
|
|
code: F1-TPS2501
|
|
Tanaka TPS 2701 Pole Saw
|
|
|
|
Features Tanakas revolutionary S start easy starting system (This machine can be started with your finger and thumb first time every time)
Tanaka TPS-270PF Power Tree Pruner. Ideal for trimming and pruning trees. Cut branches up to 8" in diameter. - 27 cc, 1.3 h.p. PureFire two-stroke engine
- Comes with 10" bar and chain
- 90" (7.5 ft.) Overall length
- FIVE year warranty / LIFETIME Drive Shaft Warranty
- 11.4 lbs.
|
|
|
code: P1-AHS242
|
|
Shindaiwa Mid-Reach Hedgecutter 23.9cc Engine (ABBEY SPECIAL OFFER)
|
|
|
|
A light and poweful articulated mid-reach hedge trimmer.
Our winning Long reach hedgetrimmer receives a make over!
With the new 2 stage compliant engine and a mid reach shaft it is sure to become one of the best selling products within the Shindaiwa range. It's 22" double reciprocating blades make it perfect for trimming tal hedges and low ground cover - Blades Adjustable to 10 different positions -range 150 degrees
- Air cleaner Silenced
- Crankshaft 3-piece
- Handle and Throttle YES
- Dry Weight 13.1 lbs. (6.0 kg
- Displacement 1.4 cu. in. (22.5 cc)
- Ouput 1.1 hp (0.8 kW) @ 7500 rpm
- Fuel Capacity 18.7 oz. (554 ml)
- Fuel 50:1 Petrol/Oil Mix
- Overall Length 63 in. (1600 mm)
- Bar Length 56.7cm
|
|
|
code: PPT2400
|
|
Echo PPT2400 Power Pruner
|
|
|
|
The best and easiest way to prune trees and cut off dead and unwanted branches. Echo Power Pruners are available in three sizes, from a model which when unextended will reach branches up to 12ft (3.66m) above your head (or 15ft if extended) to a model which will reach 23ft (7.01m) high when extended. They carry chainsaw heads - 10" (25cm) for the two smaller models and 12" (30.5cm) for the largest. The two larger models have telescopically adjustable shafts.
|
|
|
code: SH9
|
|
SHIBAURA HT50E POLE HEDGE CUTTER
|
|
|
|
26CC DOUBLE SIDED BLADE 19IN BLADE. POLE 1.3METRES
|
|
|
code: STLR
|
|
STIHL Long-reach hedge Trimmer
|
| HL 75K(0º) | (rrp £468.00) | | £424.77 | (email for availability) |
| HL 75K (0º-90º) swivel | (rrp £515.00) | | £466.85 | (email for availability) |
| HL 75 (0º) | (rrp £492.32) | | £445.32 | (email for availability) |
| HL 75 (0º-90º) swivel | (rrp £539.00) | | £488.38 | (email for availability) |
|
|
STIHL long reach hedge trimmers -
the new dimension in hedge maintenance The new STIHL long reach hedge trimmers - virtually a hedge trimmer knife on the shaft of a STIHL brushcutter, to enable very tall, long or extra-thick hedges to be shaped up efficiently. A shoulder strap ensures effortless operation. Stihl long reach hedge trimmers come in a choice of long shaft or the short shaft K model.
Both versions are additionally available with a - straight (0°)
- angled (30°) or
- adjustable cutter bar (0° - 90°).
|
|
|
code: T3-HA472A
|
|
Hayter AHD230D-S (Short Shaft) Mid Reach Hedge Trimmer
|
|
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
AHT 230D-S
400mm double blade cutter bar can be adjusted from an angle of -45 degrees to +90 degrees quickly and easily to suit the job in hand.
Two shaft lengths: 723mm and 1450mm
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with extended hedgetrimmers because of its light weight, high performance and low vibration.
Anti-Vibration System
High and low frequency vibration dampening mounts significantly reduce operator fatigue.
Solid Drive Shaft
Driveshafts are precision manufactured from solid steel and polished for optimum performance. Durable bronze bushing reduces vibration and power loss.
Threaded Clutch Drum
Our heavy-duty clutch drum is threaded for durability, eliminating the wear typical of splinded cluth drums.
|
|
|
code: T3-HA473A
|
|
Hayter AHD230D-L (Long Shaft)
|
|
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
AHT 230D-S
400mm double blade cutter bar can be adjusted from an angle of -45 degrees to +90 degrees quickly and easily to suit the job in hand.
Two shaft lengths: 723mm and 1450mm
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with extended hedgetrimmers because of its light weight, high performance and low vibration.
Anti-Vibration System
High and low frequency vibration dampening mounts significantly reduce operator fatigue.
Solid Drive Shaft
Driveshafts are precision manufactured from solid steel and polished for optimum performance. Durable bronze bushing reduces vibration and power loss.
Threaded Clutch Drum
Our heavy-duty clutch drum is threaded for durability, eliminating the wear typical of splinded cluth drums.
|
|
|
code: AHS2510-E2
|
|
Shindaiwa MID REACH Hedge Trimmer 24.5cc C4 Engine
|
|
|
|
The MID REACH Hedge Trimmer The AHS is a short shaft version for special cutting applications. Blades fold back for safe storage and easy transport. Shape any hedge with our AH2510 and AHS2510 Articulated Hedge Trimmers. Both are powered by Shindaiwa’s revolutionary 2510-series powerhead and feature durable StaySharp chrome-plated blades that remain sharp longer and cut more precisely. With more flexibility, length, and range of motion, the AH2510 can handle any hedge – high or low. The AHS2510 is shorter in length, but light and powerful with 22” double-sided reciprocating blades that are perfect for low hedges, brush, and ground cover. The AH2510 and AHS2510 feature Shindaiwa’s patented C4 Technology® engine for remarkable power with low engine noise, low emissions, and excellent fuel economy Fuel 50:1 Petrol/Oil Mix Vibration Idling Front 2.9 m/s² Vibration Idling Rear 1.8 m/s² Vibration Wide Open Throttle Front 9.8 m/s² Vibration Wide Open Throttle Rear 10.6 m/s² Sound Pressure Idling 74dB(A) Sound Pressure Wide Open Throttle 94dB(A) Sound Power Wide Open Throttle 100dB(A) Standard Equipment Low noise characteristics of a 4-cycle engine Better fuel economy Shindaiwa ONE™ 50:1 2-cycle mix - No Dipstick!
|
|
|