 or choose below
Rotavators
Shredders / Chippers
Stihl Specials
Carriages Surcharges
|
code: R1-HA470A
|
|
Hayter HT230DS-R Hedge Trimmer
|
| (rrp £292.64) | | £259.52 | (email for availability) |
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with hedgetrimmers because of its light weight, high performance and low vibration.
Rotating Handle
The 5 position rotating handle makes vertical and angled trimming easy.
Blades
The 600mm long induction hardened chrome steel blade is polish ground and sharpened on all three surfaces for a cleaner cut.
Light at only 5.2 kg
|
|
|
code: T3-HA471A
|
|
Hayter HT230-S Hedge Trimmer (Single Side)
|
|
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with hedgetrimmers because of its light weight, high performance and low vibration.
Single Side
The single sided HT230-S is fast cutting with all the engine power to the one blade.
Blades
The single sided 720mm long induction hardened chrome steel blade is polish ground and sharpened on all three surfaces for a cleaner cut.
Light at only 5.3kg
|
|
|
code: T3-HA472
|
|
Hayter AHD230D-S (Short Shaft) Hedgetrimmer
|
|
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Light weight at 5.2kg
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
AHT 230D-S
400mm double blade cutter bar can be adjusted from an angle of -45 degrees to +90 degrees quickly and easily to suit the job in hand.
Two shaft lengths: 723mm and 1450mm
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with extended hedgetrimmers because of its light weight, high performance and low vibration.
Anti-Vibration System
High and low frequency vibration dampening mounts significantly reduce operator fatigue.
Solid Drive Shaft
Driveshafts are precision manufactured from solid steel and polished for optimum performance. Durable bronze bushing reduces vibration and power loss.
Threaded Clutch Drum
Our heavy-duty clutch drum is threaded for durability, eliminating the wear typical of splinded cluth drums.
|
|
|
code: T3-HA473AA
|
|
Hayter AHD230D-L (Long Shaft) Pole Hedge Trimmer
|
|
|
|
Reverse Start:This is an assisted start system that starts the engine when the rope is released. This system is unique, simple to use and requires very little effort to start the engine. Clutch
The clutches are manufactured from die cast material and fitted with bonded fibrous linings resulting in significantly reduced heat build-up and longer life. The clutches are larger than competitors for better power transfer to the blades.
Light Weight at 5.7kg
Gearbox
The main gear has a larger circumference and greater material thickness for better power transfer to the blades and longer product life. The cams are pressed into the main gear rather than spot welded to provide extra durability.
AHT 230D-S
400mm double blade cutter bar can be adjusted from an angle of -45 degrees to +90 degrees quickly and easily to suit the job in hand.
Two shaft lengths: 723mm and 1450mm
LE Engines
The LE 2-cycle 22.5cc engine is ideally suited for use with extended hedgetrimmers because of its light weight, high performance and low vibration.
Anti-Vibration System
High and low frequency vibration dampening mounts significantly reduce operator fatigue.
Solid Drive Shaft
Driveshafts are precision manufactured from solid steel and polished for optimum performance. Durable bronze bushing reduces vibration and power loss.
Threaded Clutch Drum
Our heavy-duty clutch drum is threaded for durability, eliminating the wear typical of splinded cluth drums.
|
|
|
|
Would you like to receive email updates on our special internet offers? If so, please click here.
We also sell protective clothing for use with garden machinery ...
