Commercial Chippers

• GTE 270
• 270 cc
• 9 hp
• 6.6 kW
• 5.3 l fuel tank capacity
• unleaded 95
• max. diamater wood 80 mm
• input height 1000 mm
• input 250 x 250 mm
• output height 140 cm
• output deflector
• deflector possible to adjust continuously to 45°
• emergency stop
• diameter wheels 400 mm
• wheels with ball bearings
• 2 blades
• 150 x 63 x 152 cm
• 132 kg

• Mitsubishi GM401
• 391 cc
• 13 hp
• 9.6 kW
• 6 l fuel tank capacity
• unleaded 95
• max. diamater wood 85 mm
• input height 1000 mm
• input 340 x 420 mm
• output height 140 cm
• output deflector
• deflector possible to adjust continuously to 45°
• emergency stop
• diameter wheels 400 mm
• wheels with ball bearings
• 2 blades
• 150 x 75 x 152 cm
• 165 kg

Here's the machine the entire industry's been demanding - a 13 or 20 hp chipper. Both are capable of devouring branches up to 4" in diameter through a wide hopper and chipper opening.

Bear Cat's 4" chippers come with a standard discharge chute and adjustable deflector, rotating a full 360 degrees for exceptional accuracy when directing chips into a truck, trailer or wagon.

Four reversible chipper blades are mounted to a 140-pound disc that's 20" in diameter and 1-1/4" thick for the mass and momentum that devours branches and small trees in the blink of an eye.

Road towable-with a 2" ball coupler, 44" wheel base and Tortlex suspension axle-the Bearcat chippers are also simple to operate, with a big 27"x28" feed hopper and 5-1/2"x7" chipper opening that defies small side limbs.

An adjustable cutter bar with 4 reversible edges maintains efficient chipping action for many hours of use.

The perfect machine for so many tough jobs and applications

Get the job done and into the truck quickly and easily with the73554s.Heavy duty constuction, the 73554s PTO 3 point hitch chipper/shredder weighs 327 kg,and will give you years of dependable service.The Heavy duty double banded belt gives a more positive transfer of power.A great machine to move from job to job.The 75524s is the machine landscapers and golf courses need to clean up,move debris and make mulch.A self-feed chipper/shredder without a screen reduces plugging,especially with damp material.The 18"x75" thick  66kg dynamically-balanced roter is equiped with 4 reverible chipper blades, 36 shredder knives and 4 thrower blades.

Bear Cat 4" and 5" Power Take Off Chippers.

If a 4" or 5" PTO chipper will handle your debris, the Model 73454 or the Model 74554 is just the ticket. You choose the model based on your power requirements. If you have a utility tractor with a 540 rpm PTO, one of these is your pick.

Built BearCat tough yet compact in design, the 4" and 5" chipper will handle your debris recycling problems.

With your choice of self feed Model 73454 or hydrostatic hydraulic feed Model 74554, you get 20" x 1 1/4" balanced steel disc with four reversible chipper blades, easy feeding with a big 27"x28" feed hopper and 5-1/2"x7" chipper opening that defies small side limbs, 360 degree rotating discharge tube and 15" diameter feed roller with 10 knives.
Add the ease of a hinged chipper disc cover for quick access to blades and heavy-duty 140 lb. discs and your debris problems are solved!

For ease of use and rugged reliability, it's hard to beat these Bearcat commercial grade, heavy-duty machines.

With a 24 horsepower Honda OHV V-twin engine for the power plant and you've got a steady workhorse that will churn through the toughest woods day after day. Electric start is standard so you can save your energy for the real work.

Rotating 360°, the discharge chute gives you accurate control over the flow of chips produced by the four reversible chipper blades mounted on a balanced 30" diameter disc which feeds an aggressive blower discharge system. Plate steel construction means solid performance for hundreds of hours, and maintenance is enhanced by a hinged disc cover that provides wide open access to the chipper blades and disc.

There isn't much that can stand up to the mighty Bear Cat 9" chippers. Based on a solid four-inch "C" channel frame, these machines make branches and trees up to 9" in diameter disappear in a hurry, leaving a manageable pile of chips.

Four reversible chipping blades make quick work of the toughest hardwoods, turning them into chips.

A digital programmable feed sensor and hourmeter are factory installed and standard equipment on the 9" Bear Cat Chipper.

The 30" diameter, 1.25" thick dynamically-balanced chipper disc weighs 275 pounds produces tremendous chipping power. A triple banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. Service and maintenance is made easy by a hinged disc cover.

With 18 gallons in the fuel tank, you'll create piles of chips between refills. A full set of gauges enable the operator to monitor primary functions at all times. These chippers are electric start(battery not included).

Getting The Most From Your Tractor Just Got Easier

Power take offs on utility tractors have become a primary source for much of the work around farms, orchards ... any place where the need exists for turning a pile of branches into a pile of chips. You choose - self feed or hydrostatic hydraulic feed for infinite feed settings - these chippers mount on your three point hitch and hook directly to the PTO (power take off) for quick setup and power on demand.

Rotating 360°, the discharge chute gives you accurate control over the flow of chips produced by the four reversible chipper blades mounted on a balanced 30" diameter disc which feeds an aggressive blower discharge system.

Plate steel construction means solid performance for hundreds of hours, and maintenance is enhanced by a hinged disc cover that provides wide open access to the chipper blades and disc.

(Note - For use on Tractors with Engine Horsepower Ratings from 22 hp-diesel and 24 hp-petrol to 60 hp).

The Bearcat 77413s towable chipper has a 13hp honda OHV engine.Its heavy duty axle with 4-bolt hub and 480/400 by 8"(20CM) wheels and tyres make this unit towable up to 45 mph.Not suitable for road towing as standard but can be modified.This chipper is built with heavy duty, 7-guage chipper housing and trailor constuction.Both the Hona engine and PTO model contains a double banded belt drive and feature a feed chute opening of 13"x14.5".The 14"x1" thick, 22kg dynamically- balanced disc with cantilever design reduces wrapping while utilizing two reversible chipper blades.Quick change hitch and axle can be changed to front or to back of the chipper allowing the chipper to be towed from either end.A 4.5" square optional discharge chute with cap can be added which directs the chips and raises the discharge of chips into a truck or van.

• 180mm 7" Capacity
• 37hp lombardini Deisel Engine 
• 2 Year Engine warranty
• Twin Hydraulic Feed Roller
• Digital Stress Power Control
• Cutting Disk Blade Chipping
• Two huge cutting blades
• Optional Folding Infeed Chute
• 25 Litre Fuel Tank
• Fully Braked
• Made in Germany
• Ultra Light 1080kg
• Disgarge Pipe Rotates 260 degree
• Short 3400mm length
• The Best all round value wood chipper on the market

The Forester Shredder Chipper, with its 4-inch chipping capacity, is the top of the range and intended for use in the largest gardens and estates. Its extra engine power, extra hammers and extra-large shredding chamber give it the ability to do all the jobs its smaller brothers can do but much more quickly.

The output of any shredder is directly related to its engine size and the Forester can produce over 50% more - both shredding and chipping - than the 9hp Garden Master and 150% more than the 5.5 hp machine. Its 4-inch chipper not only copes with thicker branches but handles smaller and bushier branches more quickly. In a garden where time is money, the Forester soon repays the extra outlay.

The 10-hp Lombardini diesel engine delivers the same power as the 13-hp petrol engine and offers the economy of running on agricultural diesel fuel, where this is available, and the fuel savings repay the higher initial cost over the working life of the machine.

The Forester's wide pneumatic tyres spread its load over a large surface area enabling it to be moved easily over soft ground. One person can pull it along quite easily or it can be hitched behind a tractor, ATV or ride-on mower to move it longer distances or over rough ground. The pneumatic tyres combine with the large engine muffler to reduce vibration and engine noise to a minimum.

• British made. BS EN294:1992 compliant
• Choice of 10-hp Lombardini diesel or 13-hp Honda petrol engine, electric start.
• Triple A-section V-belts.
• Chips up to 4" (100mm) diameter.
• Shreds up to 5/8" (l5mm) diameter.
• 1.6 cu.ft. (45 litre) shredding chamber.
• 190 sq.in. (0.12 sq.m.) shredding screen.
• Interchangeable shredding screens (20mm and 40mm supplied) 60mm screen option available.
• Two chipper knives, easily sharpened and replaced.
• 54 reversible fixed hammers.
• Four 12"-diameter wheels with 4"- wide pneumatic tyres.
• Length 63" (1600mm).
• Width, chipper chute in transport position, 32¼" (820mm).
• Width, chipper chute in operating position, 52" (1320mm).
• Height, chipper chute in transport position, 59" (1500mm).
• Height, chipper chute in operating position, 53½" (1360mm).
• Weight, with Honda 13-hp petrol engine, 480lb (218kg).
• Weight, with Lombardini diesel engine, 517lb (235kg).
• Loading height (shredder) 47¼" (1120mm).
• Loading height (chipper) 43½" (1110)mm.  
• Shipping dimensions: Length 63" (1600mm), width 32¼" (820mm), height 59" (1500mm).
• Output up to 2-3 cu.m. (70-100 cu.ft.) per hour.
• Built-in tractor tow hitch.
• Safe, rugged, dependable.
• Easily managed and maintained.

The Forester Shredder Chipper, with its 4-inch chipping capacity, is the top of the range and intended for use in the largest gardens and estates. Its extra engine power, extra hammers and extra-large shredding chamber give it the ability to do all the jobs its smaller brothers can do but much more quickly.

The output of any shredder is directly related to its engine size and the Forester can produce over 50% more - both shredding and chipping - than the 9hp Garden Master and 150% more than the 5.5 hp machine. Its 4-inch chipper not only copes with thicker branches but handles smaller and bushier branches more quickly. In a garden where time is money, the Forester soon repays the extra outlay.

The 10-hp Lombardini diesel engine delivers the same power as the 13-hp petrol engine and offers the economy of running on agricultural diesel fuel, where this is available, and the fuel savings repay the higher initial cost over the working life of the machine.

The Forester's wide pneumatic tyres spread its load over a large surface area enabling it to be moved easily over soft ground. One person can pull it along quite easily or it can be hitched behind a tractor, ATV or ride-on mower to move it longer distances or over rough ground. The pneumatic tyres combine with the large engine muffler to reduce vibration and engine noise to a minimum.

• British made. BS EN294:1992 compliant
• Choice of 10-hp Lombardini diesel or 13-hp Honda petrol engine, electric start.
• Triple A-section V-belts.
• Chips up to 4" (100mm) diameter.
• Shreds up to 5/8" (l5mm) diameter.
• 1.6 cu.ft. (45 litre) shredding chamber.
• 190 sq.in. (0.12 sq.m.) shredding screen.
• Interchangeable shredding screens (20mm and 40mm supplied) 60mm screen option available.
• Two chipper knives, easily sharpened and replaced.
• 54 reversible fixed hammers.
• Four 12"-diameter wheels with 4"- wide pneumatic tyres.
• Length 63" (1600mm).
• Width, chipper chute in transport position, 32¼" (820mm).
• Width, chipper chute in operating position, 52" (1320mm).
• Height, chipper chute in transport position, 59" (1500mm).
• Height, chipper chute in operating position, 53½" (1360mm).
• Weight, with Honda 13-hp petrol engine, 480lb (218kg).
• Weight, with Lombardini diesel engine, 517lb (235kg).
• Loading height (shredder) 47¼" (1120mm).
• Loading height (chipper) 43½" (1110)mm.  
• Shipping dimensions: Length 63" (1600mm), width 32¼" (820mm), height 59" (1500mm).
• Output up to 2-3 cu.m. (70-100 cu.ft.) per hour.
• Built-in tractor tow hitch.
• Safe, rugged, dependable.
• Easily managed and maintained.

The Forester PTO has the same shredding and chipping specification as the 13-hp Forester but is built to mount on the 3-point linkage of a category 1 agricultural tractor and operate from its rear 540-rpm power-take-off drive. Within the shredder chipper, triple A-section V-belts gear-up the PTO speed to drive the rotor at 1350 rpm.

Attaches to any category 1 agricultural or compact tractor which has a 13/8" six-spline rear PTO drive. Category 1 encompasses tractors of up to 33kW (44hp) and the smallest suitable tractor is one of 12hp. The shredder/chipper will not attach to a ride-on mower or a Countax or Westfield garden tractor.

A quick-release PTO drive shaft equipped with a radial-pin clutch that slips at a preset load of 300Nm with an audible warning is supplied with the shredder/chipper. The shaft has a 13/8" six-spline coupling at each end but other shafts can be supplied to suit old or none-standard tractors - especially old Fergies!

This is a very versatile and powerful unit which provides the transportability necessary for the largest properties and the reduced running costs of agricultural diesel fuel.

• British made. BS EN294:1992 compliant  
• Operates from category 1 tractor with power-take-off drive.  
• Supplied with quick-release PTO drive shaft. 
• Triple A-section V-belts gear-up the 540 PTO speed to 1350rpm.  
• Chips up to 4" (100mm) diameter. 
• Shreds up to 5/8" (15mm) diameter. 
• 1.6 cu. ft (45 litre) shredding chamber. 
• 190 sq.in. (0.12 sq.m.) shredding screen. 
• Interchangeable shredding screens (20mm and 40mm supplied.  
• Two double-edged chipper knives, easily sharpened and replaced.  
• 54 reversible fixed hammers. 
• Weight 4001b (182kg). 
• Height 56" (1425mm), length 52.75" (1340mm). 
• Width (chipper chute up) 39.75" (1010mm). Width (chipper chute down) 51.25" (1250mm). 
• Shredder chute loading height 49" (1250mm). 
• Output 2-5 cu.m (70 - 160 cu.ft) per hour, depending on available tractor power.  
• Safe, rugged, dependable. 
• Easily managed and maintained.

Max diameter		50mm
Engine	Manufacture	Briggs & Stratton
	Power	9hp
	Fuel type	Petrol
	Fuel tank capacity	7.9l
In-feed height		730 mm
In-feed Dimensions (w x h)		325 x 255 mm
Discharge pipe		Fixed (L or R)
Chipping system		Drum
Drum dimensions (w x h)		200 mm x 130 mm
Number of blades		2 (reversible)
Anvil		1 (4 usable edges)
Drum speed rpm		2200
Drum Transmission system		1 x  v-belt
Self drive system		no
Transmission type		n/a
Speed		n/a
Drive wheels		n/a
Back wheels		Twin pneumatic
Machine	Weight	98 kg
	Width	650 mm
	Height	1150 mm
	Length

The Bio-Shredder R225 is a very compact professional machine with a new multiple cutting system composed of a special rotor with 8 mobile hardened steel hammers, 2 fixed steel blades placed on the edge of the rotor and 2 buckets inside the rotor for ejecting the minced material. This new cutting system allows to introduce in the hopper material of large and small dimensions, with no need to tear apart small branches from the main branch, assuring a very high output per hour. The direct ejection of the shredded material through the rotor without the use of an additional fan and related transmission system reduces noise level and makes maintenance operations faster.

Inside the hopper there is a hydraulic feeding roller with adjustable speed. It carries every kind of vegetable waste (both hard and fibrous, like for example palms, pines, linden tree, etc...) to the cutting group, up to max 8/9 cm of diameter. The material is discharged through a 1,5 m. high and 270° turning pipe, which is adjustable in height and distance. R225 can be equipped with Honda GX 390 or Honda IGX 440 gasoline engines, EH 41 Robin engine, with HP10 380V electric motor or it is available in the version for tractor with 3 points connection and with a power of at least 14,7 Kw/HP15. The machines with HONDA IGX 440 engine are equipped with a special automatic self controlling No-stress system patented by Negri Srl.

R225 is a compact and powerful machine, easy to use and to move thanks to the perfect balance and the use of large size pneumatic wheels.

R225 with engine is also available in the EVO version, which differs from the standard version because it can be set with agricultural carriage or with 80 km/h homologated trailer for road transport with driving licence type B. Moreover EVO version has a larger feeding hopper and the ejection pipe is higher: 1,65 m.

The compact dimensions, the lifting hooks and the great handling permit to easily load the machines on little trucks or also onto vans.

All versions are manufactured according to the safety systems in compliance with the current European standard.

• MODELLO R225/B 
• Honda GX390
• Min 15 Kw Benzina
• Honda 13HP
• R.P.M. 3600
• CHIPPING DIAMETER 90 mm 4"
• PRODUCTION 7 mc/h
• LENGTH. mm 2110 
• WIDTH. mm 915 
• HEIGHT mm 1550 
• FEEDING HEIGHT mm 1000 
• FEED HOPPER OPENING mm 700x570 
• HAMMERS 8
• BLADES 2
• WEIGHT KG. 215 

TW 125PH
Twin feed rollers give this machine exceptional performance for a chipper of this size.

Ideal for landscapers or for towing behind ATV's etc.

• Engine 20hp Honda Petrol 
• Fuel Unleaded Petrol 
• Tank Capacity  18 litres (4 gallons)
• Weight (DH)  575kg
• Length Towing 2750mm Working 3200mm 
• Width 1260mm
• Height 2100mm
• Max dia. infeed  125mm (5") 
• Throughput (DH) Up to 2 tonnes per hour 
• Feed Method Twin hydraulic feed rollers c/w No Stress 
• Blades 2 x 101mm (4") fully hardened 

The most popular chipper in the UK for many years despite having over 10 comparable competitor models available! The 150DHB has been in production for 10 years and represents unbeatable performance vs value for money.

A superb chipper for anyone looking for excellent all-round performance without paying an excessive price

• Engine 35hp turbo water cooled Kubota diesel
• Fuel Diesel
• Tank Capacity  18 litres (4 gallons)
• Weight (DH)  Unbraked 739kg Braked 746kg
• Length Towing 3050mm Working 3550mm 
• Width 1400mm
• Height 2250mm (inc. discharge) 1140mm (w/d) 
• Max dia. infeed  150mm (6") 
• Throughput (DH) Up to 4 tonnes per hour 
• Feed Method  Twin hydraulic feed rollers c/w No Stress 
• Blades 2 x 101mm (4") fully hardened 

The best gravity feed chipper on the market. With its positive blade feed and ability to be maneuvered by one person this chipper is well worth a closer look.

Will outperform many hydraulic chippers.

• Engine 18hp R/Start Industrial Engine 
• Fuel Unleaded petrol 
• Tank Capacity  6.5 litres (1.5 gallons) 
• Weight (DH)  385kg
• Length 2910mm
• Width 1240mm
• Height 2210mm
• Max dia. infeed  100mm (4") 
• Throughput (DH) Up to 1.5 tonnes per hour 
• Feed Method  Positive blade feed 
• Blades 2 x 177mm (7") fully hardened 

TW 190DH/TURBO DH
The ultimate contractor's machine for working 24-7. Built to the very highest standards, it will tackle the toughest jobs with the minimum of maintenance. This machine will satisfy the most demanding professional users. Available with naturally aspirated or turbo-charged engine for even greater throughput.

• Engine 35hp/45hp turbo water cooled Kubota diesel
• Fuel Diesel
• Tank Capacity  58 litres (12.5 gallons)
• Weight (DH)  1035kg
• Weight (TURBO DH)  1000kg
• Length Towing 3380mm Working 3980mm 
• Width 1490mm
• Height 2310mm
• Max dia. infeed  190mm (7.5") 
• Throughput (DH) Up to 5 tonnes per hour 
• Throughput (TURBO DH)  Up to 6.5 tonnes per hour 
• Feed Method  Twin hydraulic feed rollers c/w No Stress 
• Blades 2 x 127mm (5") double sided fully hardened 

TW S425 Professional Shredder
And now for something completely different…..

The Timberwolf S425 shredder provides performance that has never been available to you at this price before. It is no exaggeration to say that even if you spend twice as much you will find it difficult to find a shredder that can match the S425.

The Timberwolf S425 Turbo meets the demand for a heavy duty, professional shredder. Whether your problem is bulky green waste, tree brash, pallets, packaging materials, plastics, cardboard or contaminated timber, this versatile unit will save you time and money.

• Stunning performance on a wide variety of material makes this the shredder of choice for anyone
• with a commercial-sized waste problem and a tight budget.
• Engine 45hp Kubota 4 cyl turbo diesel 
• Fuel Diesel
• Tank Capacity  33 litres 
• Weight 1230kg
• Length Towing 3562mm Working 4180mm 
• Width 1506mm
• Height 2217mm (load height 725mm)
• Infeed Size  425mm x 230 mm
• Feed Method  Hydraulic Motor 
• Autofeed Control  No stress & Auto backoff 
• Throughput Up to 3 tonnes ph (dep. on mat.) 
• Shredder Mechanism  18 Single form replaceable hammers