
 code: W2-45-047
|
|
Agri-Fab SMARTLINK System Combi Grass Care System
|
|
|
|
The Agri-Fab SmartLINK system is an innovative solution to all your lawn care needs. The SmartLINK system comprises four attachments that link up to one platform including a plug aerator, a tine dethatcher, a curved blade aerator and a lawn roller. All the attachments are easy to change, easy to store and easy to afford. You can switch from one lawn implement to another in seconds with out using tools. Just the Master Platform is necessary for all SmartLINK attachments.
|
|
|

 code: S2-BA
|
|
SCH 36" Aerator Attachment
|
|
|
|
To use this aerator attachment, the SCH 36 inch Grass Care System - Roller/Tool Carrier (the basic unit to which the aerator has to be attached) must also be purchased. This aerator has a working width of 36 inches (915mm). The penetration depth is up to 3 inches (75mm) - the roller on the basic unit can be water ballasted to give the required penetration depth. The spikes are fully protected while in operation. The aerator is specifically designed for Autumn and early Spring use to break down the surface pan of the grass to improve drainage and air penetration to the roots.
|
|
|

 code: S2-BMR
|
|
SCH Moss Rake Attachment 36"
|
|
|
|
To use this rake attachment, the SCH 36 inch Grass Care System - Roller/Tool Carrier (the basic unit to which the rake has to be attached) must also be purchased. The rake attachment is a multi-spring tined unit which will ease out moss and dead thatch from lawns. The rake can also be used for "freshening up" gravel drives. The rake has a working width of 36 inches (915mm).
|
|
|

 code: S2-BRT
|
|
SCH 36" Lawn Roller Tool Carrier
|
|
|
|
This 36 inch roller/tool carrier is the basic unit (to which other grass care tools can be attached) for the SCH 36" (915mm) Grass Care System.
The 36" roller can be water ballasted for extra weight (270 lbs / 122 kg). The top tray on the unit can be used to carry additional weight, if required.
Other products (rake, slitter, aerator, and sprayer) can be purchased and attached to this basic unit to perform a variety of essential tasks on your grass and around your garden. Not only is this a cheaper way to acquire a variety of towed accessories, but storage space is saved (compared to storing individual task-specific towed accessories).
|
|
|

 code: S2-BS
|
|
SCH 36" Star Type Slitter Attacment
|
|
|
|
To use this slitter attachment, the SCH 36 inch Grass Care System - Roller/Tool Carrier (the basic unit to which the slitter has to be attached) must also be purchased. This slitter has a working width of 36 inches (915mm). The penetration depth is up to 3 inches (75mm) - the roller on the basic unit can be water ballasted to give the required penetration depth. The spikes are fully protected while in operation. The slitter can be used at any time of the year to break down the surface pan of the grass to improve drainage and air penetration to the roots
|
|
|

 code: S2-BSP
|
|
SCH Sprayer Attacment
|
|
|
|
To use this sprayer attachment, the SCH 36 inch Grass Care System - Roller/Tool Carrier (the basic unit to which the sprayer has to be attached) must also be purchased. The sprayer attachment slots into the tray on the basic unit. The 12 volt power sprayer pump is powered from the tractor battery. The sprayer is ideal for applying fertiliser and/or weed killers to grassed areas. It is supplied with a wedge nozzle giving a 36 inch (915mm) coverage and a hollow cone nozzle for manual spraying. The trigger lance is ideal for manual spraying of insecticides on fruit trees, shrubs and roses. It canalso be used for spraying herbicides onto nettles, docks etc.
|
|
|

code: S2-P3A
|
|
SCH "P3" Aerator Areator
|
|
|
|
10 discs each carrying 6 aeration spikes. The spikes drive into the ground giving up to 125mm(5") penetration with added weight. The opening up of the surface relieves compaction, improves drainage and allows air and feed to reach the root formations quickly. Requires the P3 carrier frame.
|
|
|

code: S2-P3B
|
|
SCH "P3" Brush Attachment
|
|
|
|
The brush attachment consists of two rows of stiff, closely woven, bristles. The bristle pressure on the ground can be altered by adjusting the two depth wheels on the carrier frame. The brush attachment is ideal for brushing in top dressing, dispersal of casts and if required removal of dew and stripping. Other configurations available i.e. Zig Zag. Requires the P3 carrier frame.
|
|
|

code: S2-P3F
|
|
SCH "P3" The Carrier Frame
|
|
|
|
The P3 carrier frame is attached to the tractor by the three point linkage system. The frame has a built in weight tray in order that top weight may be added to achieve the penetration required of the fitted attachment. Weighting containers (water filled) are included. Two adjustable screw operated wheels will hold the frame to the correct working depth and pressure.
|
|
|

code: S2-P3R
|
|
SCH "P3" 60" Roller Attachment
|
|
|
|
The roller fixes to the underside of the carrier frame. The roller can be weighted up to three point linkage lifting capacity.
Working width: 1530mm(60")
Diameter: 306mm(14") Requires the P3 carrier frame.
|
|
|

code: S2-P3S
|
|
SCH "P3" Slitter 60" Attachment
|
|
|
|
10 free floating discs with springs between each disc keep the discs to the correct spacing. Up to 125mm (5") of slit depth can be achieved with added weight. Requires the P3 carrier frame.
|
|
|

code: S2-PSDTC
|
|
SCH "P3" Dethatching Rake Attacment
|
|
|
|
Consists of two rows of spring tines. These tines will delve into matted grass areas quickly and efficiently teasing out the thatch. The rake can also be a very useful tool in helping to keep menage surfaces in good order and "freshening" gravel drives. The depth wheels fitted to the carrier frame allows adjustment to the "tine presure" on the surface being scarified. Requires the P3 carrier frame.
|
|
|