Chainsaw Gloves

Chainsaw Gloves with saw protection

• Shaped and reinforced palm.
• Exposed areas are seamless and reinforced with leather.
• Waterproof kid leather palm and hard-wearing, water-repellent polyester back.
• Sizes S-XL.  
• Meets requirements of EN 381-4 -7, EN 420:1, EN 388, class 0-16 m/s

Click here for glove size chart.

Arbortec AT850 Chainsaw Gloves

• High quality cowhide
• Supple leather glove with nylon back panel
• Reinforcement on plams
• Reflective strip for added safety
• Elasticated knitted wrist
• Class 1 protection (left hand only)
• 20m/s Class 1 EN420: 2003, EN381-7: 1999
• Sizing: Small (7), Medium (8), Large (9), XLarge (10), XXLarge (11)

With it's snug fit, high-tec materials and gel palm pads, the AT900 is the favourite choice for experts. For a professional chainsaw glove, this is hard to beat. With it’s snug fit, high-tec materials and gel palm pads, the AT900 is the favourite choice for experts.

• MATERIALS - Soft leather front and 4-way stretch fabric back with rubber finger and palm reinforcement. Gel Inserts in palm.
• BENEFITS - Flexible, dexterous and hard wearing. Extra comfort with gel inserts.
• STITCHING - Heavy Duty Threads
• BENEFITS - Increased durability.
• CUFF - Extended length with velcro adjustable strap. Pull on tab.
• BENEFITS - Stops muck and dirt getting into the glove. Keeps glove tight on the hand.
• LINING - Saoft moisture wicking fleece.
• BENEFITS - Reduces sweat.
• Saw Protection - Multi-layer high tenacity polester clogging fibres. Left Hand Only.
• BENEFITS - Safe - layers aren't reduced to make the glove lighter.
• CE SPECIFICATION - EN388:2003 (2,1,3,2) & EN420:2003 & EN381-7:1999 Class 0 (16m/s)
• BENEFITS - Fully SATRA certified - no worries as to safety.
• SIZE RANGE - 7 - 12

The top quality cowhide leather in the Forester glove has to be seen to be believed! For ultimate protection in the heaviest forest duties.

• Top quality water resistant cowhide chainsaw gloves.
• Robust design with double cuff
• Heavy duty padded rubber palm
• Elasticated knitted wrist
• Class 1 (20 m/s) protection in both hands.)
• 20m/s Class 1 EN420: 2003, EN381-7: 1999

The best arborist glove available with dual hand chainsaw protection and reinforced leather palm

combined with maximum comfort. Sure to become a favourite amongst the professionals

• EN381-7 1999 Class 1 (20m/s)
• Protection on both hands
• Quality hide chainsaw glove
• Reinforced leather palm for longer life
• Ultra snug fit
• Velcro wrist closure
• Shower resistant backing
• Tough Pull on tab
• SIZE RANGE 8-11

Trigger finger style gloves are designed to help hands stay warm while at the same time being able to work with chainsaws and other power products efficiently.

• Waterproof kid leather palm
• Hard-wearing
• Water-repellent polyester back
  
  

Oregon Low Cost 91305 Left Hand Protection chainsaw glove

• Smooth Leather, Hi-visibility gloves
• Excellent chainsaw feel
• Durable palm area
• Close fit elasticated wrist design
• Protection to EN381-7, class 0, 16m/s
• Complete with multilingual instructions

Please measure your hand and select size

Medium          9 cm
Large             10 cm
X Large          11 cm

Oregon Low Cost Chainsaw Gloves 295399 Both Hand Protection

• Smooth Leather, Hi-visibility gloves
• Excellent chainsaw feel
• Durable palm area
• Close fit elasticated wrist design
• Protection to EN381-7, class 0, 16m/s

Please measure your hand and select size

Medium          9 cm
Large             10 cm
X Large          11 cm

Husqvarna Technical Protective Arborist Chainsaw Gloves

Husqvarna Technical Protective Chainsaw Safety Gloves

Part No 5793810

Technical glove with saw protection 20 m / s Coated goatskin in the palm of jersey fabric, foam laminated spandex on top. Goatskin provides good protection against moisture as it contains natural fat and is therefore suitable for demanding work. Made with comfortable double seams that follow the hand shape. Have a short and tight fit for good mobility.

Approved to EN 388, EN 381-7
Category II
Class 1 (20 m / s)

For safe and perfect fit of the glove with a convenient Velcro wrist fastening.

Soft terry thumb to wipe the nose and face.

Edging in reflective material to appear well in dark conditions.

Click here for glove size chart.

The Best Anti Vibration Gloves
Used by operators of trimmers, brushcutters and other vibrating machinery. Gel found in the palm, thumb and finger area for increased cushioning and protection.Stretch Codura Ultra tough glove. Double stitched Velcro elasticated wrist strap. Full stretch in knuckles.

Partial Gel- 2 mm thick

The Best Anti Vibration Gloves

Used by operators of trimmers, brushcutters and other vibrating machinery. Gel found in the palm, thumb and finger area for increased cushioning and protection. Stretch Codura ultra tough glove. Double stitched vVelcro elasticated wrist strap. Full stretch in knuckles.

Full Gel- 4 mm thick

A comfortable saw protection glove made with a goat leather double palm with foam laminated spandex on the back and with nylon neoprene knuckles. Goat leather has a good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs. Knitted wrist makes it easy to put on and gives a soft comfort.

Francital Climbing Gloves 

Thumb, index and middle fingerless (optional) for extra feel and grip. This glove is manufactured in a synthetic leather (60% nylon / 40% PU) and has a spandex back for ease of movement.  PVC anti-slip grip on fingers and palm. Neoprene knuckle protection and an elasticated velcro cuff.

EN420

Sizes: Small, Medium and Large

• 5-finger gloves, cow hide. EN281-4,
• Class 1 (=20 m/s), with cut-resistant inlay in the back of both gloves. 
• All gloves comply with the requirement of the following standards EN388 and EN420. 
• Part No. 0000 883 1500/1501

• Chainsaw resistant glove featuring a palm with water-repellent smooth goat grain leather with rubber reinforcement and Kevlar yarn stitching for added durability.
• Back in Nylon/Lycra fabric for flexibility, laminated with a water repellent and breathable membrane to keep the hands dry.
• Wide chain saw protection given by an added lining of specific chain arrest material on the back of the left glove.
• Elasticated wrist with self fastening system.
• Conforms to EN 388 & EN 381-7 class 0

Click here for glove size chart.

Using a brushcutter can be tiring for long periods of time.

The A520F Anti-Vibration Gloves offer the following specification:

• Specifically designed for use with brush cutters
• Palms lined with high-density material to absorb vibration
• High quality oil & water resistant leather
• Additional protection over knuckles
• Knitted wristband
• Kevlar stitching throughout

Please select the glove size you require
All prices include VAT

Click here for glove size chart.

SIP PROTECTION Chain Saw Gloves A52AC

Using a hand held chain saw can be extremely hazardous. To protect against possible personal injury, suitable protective clothing should always be worn

The A52AC Chain Saw Gloves offer the following specification:

• Conforms to EN 381-7 class 0
• SIP anti-cut protection
• Protection in both hands
• High quality oil & water resistant leather
• Anti-slip palms
• Knitted wrist
• Kevlar stitching
  
  The SIP Protection 'Trade' range of clothing has been tested and certified by SATRA, as conforming to EN 381-5. The garments offer an excellent combination of comfort and durability.
  
  

  Please select the glove size you require
  All prices include VAT

  Click here for glove size chart.